Grey Conservatory Aluminium Profiles Lightweight Corrosion
Resistance
Conservatory Aluminium Profiles Comfortable material grey light
weight corrosion resistance main beam for room
1. Features of aluminum
1. Corrosion resistance
Under most environmental conditions, aluminum can display excellent
corrosion resistance, including air, water (or brine),
petrochemistry and many chemical systems.
2. Conductivity
On the basis of equal weight, the conductivity of aluminum is
nearly two times that of copper.
3. Thermal conductivity rate
The thermal conductivity of the aluminum alloy is about 50-60% of
the copper, which is beneficial to the manufacture of heat
exchangers, evaporators, heating appliances, cooking utensils, and
the cylinder head and radiator of the car.
4. Nonferromagnetism
Aluminum profiles are non-ferromagnetic, which is an important
feature for the electrical industry and the electronics industry.
Aluminum profiles are not self ignition, which is important for the
application of loading and unloading or contact with flammable and
explosive materials.
5. Machinability
The machinability of aluminum profiles is excellent. In all kinds
of deformed aluminum alloys and cast aluminum alloys, and in the
various states after these alloys are produced, the change of
machining characteristics is quite large, which requires special
machine tools or technology.
6. Formability
The specific tensile strength, yield strength, ductility and the
corresponding work hardening rate govern the variation of allowable
deformation.
7. Recovery
Aluminum has very high recyclability, and the properties of
recycled aluminum are almost the same as that of native aluminum.
2. Introdution
Powder spraying is used to spray powder coating on the surface of
the workpiece by spraying powder equipment (electrostatic spray
plastic machine). In electrostatic action, the powder will be
evenly adsorbed on the surface of the workpiece to form a powdery
coating; the powder coating is solidified by high temperature
baking and becomes the final coating of different effect (different
kinds of powder coating effect) The powder spraying effect is
superior to the spray painting process in terms of mechanical
strength, adhesion, corrosion resistance and aging resistance, and
the cost is also under the same effect of spray painting.
The coating is mixed with special resin, pigments, fillers, curing
agents and other auxiliaries in a certain proportion, and is
prepared by hot extrusion and crushing and screening. At normal
temperature, they are stable in storage, by electrostatic spraying,
friction spraying (thermosetting) or fluidized bed soaking
(thermoplastic), and reheating the curing and curing to make a
smooth and bright permanent coating to achieve the purpose of
decoration and corrosion protection.
| Implements National Standard | Gb/5237.3-2008 |
| Coat Thickness | 40um<=thickness<=120um |
| Coat Shock-Resistance | No cracking or fall-off afer shock test |
| Surface Type | Matte , Highly glosy |
| Colours | Optional RAL colours(over 100 types) |
| Adwantages/Features | Providing colourful products with various mechanical performances
to adapt all kinds of architectural styles.
|
3. Features:
1. High Efficiency: Because It Is Disposable Membrane, It Can
Increase Productivity 30-40% 2.Save Energy: Reduce Energy
Consumption By About 30%.
3. Less Pollution: No Organic Solvent Volatilization (Not
Containing Toluene, Xylene And Other Harmful Gases In Paint).
4. The Coating Utilization Rate Is High: Up To 95%, And The Powder
Can Be Used Repeatedly After Recovery.
5. Film Performance Is Good: Disposable Film Thickness Can Reach
50-80 M, Its Adhesion, Corrosion Resistance And Other Comprehensive
Indicators Are Better Than The Paint Process.
6. Finished Product Rate Is High: Before Curing, It Can Carry Out
Two Times Re Injection. There Are Many Kinds Of Powder Coating
Process, And There Are Two Kinds Of Electrostatic Powder Spraying
And Plastic Dipping.
Powder Coating Is A New Type Of Solid Powder Coating Without
Solvent 100%. It Has The Characteristics Of No Solvent, No
Pollution, Energy And Resources Saving, Labor Intensity Reduction
And Mechanical Strength Of Coating Film.
Please tell us the information below, and we will give the best
suggestion to you!
1. Where you intend to use the aluminium profiles?
2. If you have the estrusion drawing, send us and we develop the
correspondence mold.
3. Which color you want or tell us the architectural style you
like.
4. Purchase quantity. It will convenient us to give you the best
price.
Welcome to visit our company !
Choose us & contact us!
